Dive Mask Care

Have a clear view when diving or snorkelling

How to Prepare Your New Diving/Snorkelling Mask

Sure your new diving or snorkelling mask looks fine to put on and get into the water, but that just won't work out well. You need to properly prepare the dive mask first by thoroughly cleaning it.

During the manufacturing process, a thin film of silicone and mould release agents will develop on the glass lens of your new dive mask. This film will cause rapid fogging that is resistant to conventional anti-fog measures. It is important to remove this film from the lens prior to your first dive.
To remove the film you will need to scrub the mask lens and skirt inside and out with a powerful surfactant. Please do not use toothpaste as some toothpastes can be too abrasive.
There are commercial mask cleaning products like McNett Sea Buff, but any good baby shampoo will work well. The benefit of using baby shampoo is that if you leave any residue when rinsing off, it won't cause major problems with your eyes while later diving or snorkelling.

McNett Sea Buff Dive Mask Cleaner (37ml)

Our Price: $10.00

McNett Sea Buff is a specially formulated pre-cleaner for new dive masks and an effective dive slate cleaner. Sea Buff carefully removes residue left on new dive mask lenses by the manufacturing process and prepares the surface for the first application of Sea Drops or Sea Gold anti-fog formulas. Sea Buff also removes other residue accumulated on masks while diving or during storage.

Rub the cleanser into the lens and skirt with your fingers several times and then rinse clean thoroughly with warm (not hot) clean fresh water. We suggest you do this cleaning at least twice. In the dive shop we usually tell people to do it three times in the hope they'll at least do it twice.
If you're going to keep your mask in the plastic storage box it came in, we suggest you also clean the inside of the storage box and lid the same way to remove the thin film on them as well.
Mask fogging is a normal occurrence, even after the film of silicone and release agents has been removed. Normal fogging can be easily prevented with after market anti-fog agents, saliva, or baby shampoo. Rub onto the lens and then rinse. Your dive mask should now be fog free! If it's not, you'll need to go back and clean your diving mask again as described above.
Some after after-market anti-fog agents contain formaldehyde, alcohol, or other substances that may damage the plastic materials used in your mask. If unsure, avoid prolonged exposure of the anti-fog agent with the plastic parts of your mask.

[ Top of page]

How to Defog Your Diving/Snorkelling Mask

Masks should be treated with a defogging agent before every dive or snorkel. If treatment with a defogging agent does not prevent the mask from fogging, it is possible that some residue is left over from the manufacturing process, or that you didn't properly clean the mask after your last diving or snorkelling outing. If so, you'll need to repeat the cleaning process described above.

Regardless of the brand or type of defog there are basically only three ways to defog your mask:

Commercial Defog Products – coat the lens with an inhibitor like McNett Sea Gold, and McNett Sea Drops.
Spit – For some, this is downright disgusting but it actually works. Saliva makes for an okay surfactant. It's easy and cheap.
Baby Shampoo – Apply it neat onto the inside of the mask lens when the mask is dry and then put it away for storage. Then just give it a quick rinse before you dive.

McNett Sea Gold Anti Fog Gel (37ml)

Our Price: $14.00

McNett AquaSeal Sea Gold Anti-Fog Gel is the clear choice in anti-fog gels for dive masks. The unique clear formula means long lasting anti-fog protection. Sea Gold is highly concentrated and designed for quick, simple, in-field application. Sea Gold is safe for all glass and plastic lenses and will not harm surrounding silicone or rubber support frames.

Start with a clean mask

The mask lens needs to be very clean so fog doesn't form. (Have we mentioned that enough times already?) Every once in a while it doesn't hurt to also clean the outside of the mask lens. It won't help to prevent fogging but you'll see better if the lens is clean on both sides!

Commercial Defog Products

Surfactants like McNett Sea Gold, and McNett Sea Drops can be used. Both approaches work equally well but require different application methods so it's mostly a matter of personal preference.
A cleaning spray is the most popular approach because it's quick and easy. Generously spray the inside of the mask lens, rub and rinse completely to remove. If the lens is not 'squeeky clean' then repeat and perhaps rub a bit harder.
The liquid drops are a concentrated version of the spray type cleaners. Wet the lens first, add a drop in each lens, rub and rinse completely to remove.
With the gel, apply a thin even coating to the inside of the mask lens (more is not better) and lightly rinse to smooth out the coating. Do NOT completely rinse or rub away the gel, remember you want a light coating of the gel on the lens.

Spit

While we should be trying to sell you the 'you beaut' commercial solutions, our preferred pre-dive anti-fog is spit. Spit on the inside of the mask and rub it around with your finger. Dunk the mask briefly in either fresh or sea water. The goal is to leave thin layer of saliva on the inside of the glass. Spitting does not work well if the mask dries out before diving or snorkelling, so use this technique immediately before entering the water.

Baby Shampoo

Another do it yourself pre-dive solution is baby shampoo. Baby shampoo can be used just like commercial defogging solutions. Many divers carry a bottle of 50/50 watered-down baby shampoo with their dive gear. A few drops rubbed into the lens and then briefly rinsed out just before the dive will keep a mask from fogging. We know people who prefer to apply baby shampoo neat onto the inside of the mask lens when the mask is dry just before putting it away for storage. Then you just give it a quick rinse before you dive. Baby shampoo is preferable to standard shampoo, as it is generally hypo-allergenic, less irritating to eyes, and biodegradable. Baby shampoo usually smells good, too.

Still having problems keeping your mask unfogged? Then exhale through your mouth only. If you breathe out through your nose, warm moist air comes into contact with the colder mask lens. This results in fogging. We are all primarily nose breathers and some divers find not exhaling through their nose difficult. Often divers who complain about their mask always fogging up are nose breathing.

Care During the Dive

When entering the water either from a boat or a beach, place a hand over the lens of your dive mask and hold it securely in place. This will help ensure your mask stays in place during entry and will help deflect any direct impact of water on the lens caused by the jump into the water or any approaching waves.
A typical dive staging area is a dangerous place for dive masks. Care should be taken to not leave your mask in a location where it might be exposed to dropping weight belts or tanks.
It is best to avoid putting your mask on your forehead at any time during the dive. Several factors can cause the mask on your forehead to be dislodged and subsequently lost. If you want to temporarily remove the mask from your face, place the mask around your neck.

[ Top of page]

How to Clean Your Mask After Diving/Snorkelling

Soak in warm fresh water, not over 49°C (120°F), to dissolve salt crystals.
Rinse thoroughly with fresh water and towel dry before final storage.

How to Store Your Diving/Snorkelling Mask

Store in a cool, dry and protected place out of direct sunlight.
Store separated from other dive gear as the black pigmentation of other equipment may discolour the clear silicone skirt of your mask.

Chemicals/Solvents and Diving/Snorkelling Masks

Avoid any contact with alcohol, oil, gasoline, aerosols, or chemical solvents.
Do not expose any part to aerosol spray, as some aerosol propellants attack or degrade rubber and plastic materials.
Do not use any type of alcohol, solvent or petroleum based substances to clean or lubricate any part.
Do not store your equipment near any oil, gasoline, chemicals, or solvents.

For a large range of Masks for all conditions visit the Masks section at O2ToGo Dive Centre. There you'll find a wide range of mask types, plus mask accessories.

[ Top of page]